Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED
Overview
Roll Stability for Lubricating Grease conforms to ASTM D1831 Standard Test Method for Roll Stability of Lubricating Grease. The roll stability test is widely used in specifications. Test results are significant insofar as they can show a directional change in consistency that could occur in service. No accurate correlation is established between the test results and shear stability in actual service.
Features
1.Stainless steel roller Φ90×180mm 5kg
2.Idle roller is equipped with locating ring to make the roller work normally
3.The driving motor is installed on the bottom and keeps the rotate speed at 155 to 180r/min
4.Gear drive roller
5.Microcomputer temperature controller, digital display, precision ±5℃ PT100 sensor
6.Digital timer, record the working time, equipped with buzzer alarm
7.Temperature controller operation instructions: room temperature to 180℃
Technical parameters
1.Applicable standard: ASTM D1831
2.Heating method: electric heating circle heats
3.Time method: digital timer
4.Temperature control range: room temperature to 180℃
5.Motor speed: 155 to 180r/min
6.Unit of work: 2 units
7.Rated voltage: AC220V/50Hz
8. Net dimension: 440*400*670mm, 40kg
Send Email
U-therm
U-therm
WhatsApp