Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED
Description:
SUNY-T510LP4 is an LED desinged pick and place machine with 1.2M moving table,it has 4 heads with 8pcs Yamaha feeders supported. It not only support all kinds of LED,but also 0402,0603,0805-5050, SOP,QFN,LQFP,Diode,Transistor .it has top and down two cameras vision system.Yamaha pneumatic feeder and Juki Nozzle are mature products, they are accept by customers in market,very stable and convenient! This machine for small smt production is your good helper!
It is very suitable for small and medium company and factories!
The operation system is industry level embedded Linux system, the main board of machine was researched by ourself,which is more relaible than windows system, and life time is much longer. Please purcahse it with confidence.
Specification
|
Dimensions |
2060mm(L)×605mm(W)×700mm(H) |
|
Weight |
145kg |
|
Power Supply |
AC220V (50Hz, single phase)/AC110V (60Hz, single phase);400W |
|
Air Supply |
0.5MPa ~0.7MPa |
|
Vacuum Generation |
Built-in vacuum pump |
|
Mounting Head Quantity |
4 |
|
Mounting Speed |
11000cph(optimal without vision detection); 5500cph (optimal with vision detection) |
|
Control Accuracy |
0.015mm |
|
Component Type |
0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.) |
|
PCB Thickness |
0.6mm~3.5mm |
|
PCB Size |
10mm(L)×10mm(W)～1200mm(L)×240mm(W) |
|
PCB Conveying |
Manual operation |
|
Nozzle Change |
Manual operation |
|
Control System |
Built-in computer (embedded Linux operating system), 7-inch touch screen |
|
Drive System |
X&Y-axis driven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration |
|
Transmission System |
Synchronous belt+linear guide |
|
Feeding System |
8 Yamaha standard pneumatic feeder stacks, Yamaha electric feeder supported |
|
Vision System |
Up-looking camera for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning |
Send Email
U-therm
U-therm
WhatsApp