SMT Making Machine

4 Heads Desktop Pick and Place Machine-60 tape feeding stacks 400*290mm

Model: SUNY-T560P4
Product description: 4 Heads Desktop Pick and Place Machine-60 tape feeding stacks 400*290mm
INQUIRY

Description:

SUNYT560P4 has 4 heads, mounting speed is faster. For small SMT production, it is your good helper!

The operation system is embedded Linux system, the main board of machine was researched by ourselves, which is more reliable than windows system, and life time is much longer. SUNYT530P4 using 501---507 different kinds of Juki nozzles, suitable for 0201,0402,0603,0805-5050, SOP, QFN, LQFP, Diode, Transistor, BGA...etc, which can meet more customers' demand.

Specification

Dimensions	1180mm(L)×870mm(W)×640mm(H)
Weight	140kg
Power Supply	AC220V (50Hz, single phase) /AC110V (60Hz, single phase); 400W
Air Supply	0.5MPa ~0.7MPa
Vacuum Generation	Built-in vacuum pump
Mounting Head Quantity	4
Mounting Speed	8000cph(optimal without vision detection); 5500cph (optimal with vision detection)
Control Accuracy	0.015mm
Component Type	0402/0603～5050/SOT/SOP/QFP/QFN/BGA, etc. (resistor/capacitor/diode/triode/LED/IC, etc.)
PCB Thickness	0.6mm~3.5mm
PCB Size	10mm(L)×10mm(W)～400mm(L)×290mm(W)
PCB Conveying	Manual operation
Nozzle Change	Manual operation
Control System	Built-in computer (embedded Linux operating system), 7-inch touch screen
Drive System	X&Y-axis driven by stepping motors in the way of closed-loop control; Z-axis capable of reset detection;all motors adopting flexible S-curve acceleration and deceleration
Transmission System	Synchronous belt + linear guide
Feeding System	60 Yamaha 8mm standard pneumatic feeder stacks (also suitable for Yamaha electric feeder, IC tray, and stick feeder), 11 preset general IC stacks, work surface custom IC trays supported
Vision System	Up-looking camera for component automatic calibration (component size applicable: 22mm×22mm); down-looking camera for PCB calibration via Mark Point and component positioning