Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED
Introduction:
· Meter meets with the requirement of international GLP standards. Its features up to automatic calibration, automatic temperature compensation, data storage, timing measurement, clock display, RS-232 output, function setting and self-diagnose etc.
· There are three different measurement modes: stable display mode; time measurement mode; continuous measurement mode.
· Automatically recognize 13 kinds of pH buffer solution. User can choose anyone from four series of standard buffer solutions: Europe & USA series, NIST series, CHINA series and Self-defined series.
· High purified water and ammonia added purified water pH measuring mode can be set up, especially suitable for electric power and petrochemical industry.
· With EH redox potential measuring mode can directly display ORP value which against standard potential of hydrogen electrode.
· Automatically recognize 8 kinds of conductivity standard solution. User can choose anyone from two series of solutions: Europe & USA series and China series.
· Adopt advanced and original conductivity measurement technology, use 1 pc of conductivity electrode (K=1), it can meet measuring accuracy requirement for range within 0.5μS/cm ~ 200mS/cm by using only one-point calibration.
· Automatically select conductivity measurement range, when measuring high pure water, equipment automatically enter into temperature compensation of nonlinear model, especially for electricity, microelectronics and the pharmaceutical industry requirements.
· Meter has the only product serial number.
· Dustproof and waterproof meter meets IP54 standards. All sockets are seal protected by the silica gel caps.
Specifications:
|
pH |
Measuring range Resolution Accuracy Input current Input impendance Stability Temp. compensation range |
(-1.999 ~ 19.999) pH 0.1/0.01/0.001 pH Meter: ±0.002 pH, connect meter with electrode: ±0.01pH ≤1×10-12 A ≥3×1012 Ω ±0.002 pH/3h (0 to 100) °C (automatic or manual) |
|
mV |
Measuring range(mV/ORP/EH) Resolution Accuracy |
-1999.9mV ~ 0 ~ 1999.9mV 0.1mV ±0.03% FS |
|
Conductivity |
Measuring range
Resolution Accuracy Temp. compensation range Electrode constant Reference temperature |
Conductivity:(0.00~20.00) μS/cm (20.0~200.0) μS/cm (200~2000) μS/cm (2.00~20.00) mS/cm (20.0~200.0) mS/cm (200~2000) mS/cm(K=10) Resistivity:(0 ~ 100) MΩ·cm TDS: (0 ~ 100) g/L Salinity: (0 ~ 100) ppt 0.01/0.1/1μS/cm 0.01/0.1/1 mS/cm Meter: ±0.5% FS, connect meter with electrode: ±0.80% FS (0 ~ 50) °C (automatic) 0.1 / 0.5 / 1 / 5 / 10 / 50 / 100? cm-1 25°C, 20°C and 18°C |
|
Temperature |
Measuring range Resolution Accuracy |
-10°C~ 110°C 0.1°C 5~ 60°Crange: ±0.4°C other range: ±0.8°C |
|
Other Technical Parameters: |
Data storage Storage content
Power Communication connector Size and weight Quality and safety certification |
300 groups Measuring value series number, measuring value, temperature, ATC or MTC state, measuring date and time DC9V/300mA RS232 160 × 190 × 70mm/880g ISO9001:2008, CE and CMC |
|
Working Condition |
Environment temperature Environmental humidity IP rating |
5 ~ 35 °C(0.01grade) 15 ~ 30 °C(0.001grade) ≤75% IP54 Dustproof and waterproof |
Standard kits:
|
1. Model ELE-522 Precision pH/Conductivity meter |
1set |
|
2. Model 602 flexible electrode holder |
1pc |
|
3. 201T-M plastic pH/ATC three-in-one combination electrode |
1pc |
|
4.2503-C glass pH combination electrode |
1pc |
|
5. MP500 temperature electrode |
1pc |
|
6. 2401T-M conductivity electrode |
1pc |
|
7. pH standard buffer solution (pH4.00, pH7.00 and pH10.01/50mL) |
1btl/each |
|
8. 1413μS/cm conductivity standard solution(50mL) |
2btls |
|
9. 9V power adapter (meter use) |
1pc |
|
10. RS-232 communication cable |
1pc |
|
11. ELE-522 communication software disk |
1pc |
|
12. Operation manual |
1unit |
|
13. Brief operation instruction |
1unit |
|
14. Packing List |
1pc |
Send Email
U-therm
U-therm
WhatsApp