Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED
Introduction:
The instrument is designed and manufactured by ASTM D93 standard. The instrument is used to determine flash point of petroleum products in closed cup method. The petroleum product is heating in the airtight oil cup under the standard rated condition. The mixed gas formed by petroleum product steam with the surrounding air, when contact with the flame, the lowest temperature of the petroleum product, is the flash point of petroleum products in closed cup method.
The instrument is composed of electric heating device, electric stirring device, electronic regulating device, ignition device, standard oil cup, etc. The instrument heat through controlled silicon pressure regulating control circuit. Start the motor, via driving flexible shaft, drive stirrer stir, oil temperature will be able to ensure uniformity and stability.
Technical Specifications
1.Electric heating device
Electric wire 800W
Test oil heating rate 1 ~ 12 ℃ / min
2. Electric mixing device
Constant speed motor 105 rotate / min
Driving Method: flexible shaft
Agitating vane size: 8×40mm
3. Mixing speed: 105 rotate / min
Standard Oil Cup
Inner diameter: 50.8mm
Depth: 56mm
Tested oil capacity: about 70ml
4. Ignition device:
Fire source: could use gas, liquefied gas and lighter gas
Bore diameter ø0.8mm
5. Thermometer:
Internal scale or rod mercury thermometer
Scale: -30 ℃ ~ 170 ℃ indexing 1 ℃
Scale: 100 ℃ ~ 300 ℃ indexing 1 ℃
6. Dimension: 300 × 250 × 200mm (length × width × height)
7. Weight: about 5kg
8. Relative humidity<85%
9. Ambient temperature: 10 ~ 35 ℃
10. Input power supply: AC 220V ± 10%
Send Email
U-therm
U-therm
WhatsApp