Summary
This instrument is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to make determination of the closed cup flash point of the petroleum products.
I. Main technical features
1. Single chip microcomputer control technique. LCD screen displays. English man-machine interaction interface. The heating power is continuously step-less adjustable. The rate of heating up is exact. Easy setting for parameters.
2. The LCD screen has prompting menu, prompting input operation interface. It shows the settled parameters, real-time temperatures and other test parameters. Press the “record “button when the flash point appears. The screen will show and reserve the flash point.
3. The structure is newly design and small. Stainless steel table-board looks clean and beautiful. It can be used as long as equipped with gas or other civilian fuels. It is easy to use and test results exact.
II. Main technical specifications
1. Power supply: AC (220±10% )V, 50Hz.
2. Heating device:(1) The furnace is silicon carbide material. Power is 600W.
(2) The heating power is adjustable from 0 W to 600W.
3. Heating rate: Procedure A: (5~6)℃/min, Procedure B:(1~1.5)℃/min.
Automatically controlled
4. Stirring device:(1) Stirring motor: BYGH101 stepping motor
(2) Driving mode: flexible shaft
(3) Shaft size: 8mm×40mm
5. Stirring rate: Procedure A: (90~120)RPM, Procedure B: (250±10) RPM
6. Igniting device: (1) Igniting source: gas (or other civilian fuels, the same below)
(2) Electric ignition. Gas flame diameter:3.2mm~4.8mm
7. Temperature testing probe: RTD, PT100
8. Ambient temperature:≤ 35℃
9. Relative humidity:≤ 85%
10.Maximum power consumption:650W
Ⅲ. Accessories
PT-SYD-261-1 Pensky-Martens Closed-Cup Flash Point Tester Accessories List and Documents
1. Full set of instruments
Item |
Name |
Unit |
Qty |
Remarks |
1 |
SYD-261-1 PMCC Flash Point Tester |
Set |
1 |
Including ignition unit, oil cup etc. |
2 |
Temperature sensor |
Piece |
1 |
Pt100 platinum resistor |
3 |
Driving flexible shaft |
Piece |
1 |
Installed by user himself |
4 |
latex tube φ3 0.5m |
Piece |
2 |
|
5 |
Fuse 5A (Ф5×20) |
Piece |
2 |
|
6 |
Igniting gun |
Handle |
1 |
|
7 |
Operation Manual |
Piece |
1 |
|
8 |
Quality Certificate |
Piece |
1 |
|
9 |
Repair Guarantee |
Piece |
1 |
|
2. SYD-261-1 Pensky-Martens Closed-Cup Flash Point Tester Auxiliary Equipment
No.
Name
Specification
Quantity
Memo
1
Fuel gas
Standard fuel gas steel bottle
1 bottle
Liquefied gas bottle or pipeline gas
2
Fuel gas professional reduce valve
1 piece
3
Fuel gas flexible pipe
Normal
1.2~2 meters
Notes:
1.The reagent and equipment for installing the instrument are supplied by end-users themselves.
2.The usage, management and saving of poisonous and harmful reagent, pls operate according to the relative principle.
3.PLS read the operation manual and industry standard before using the instrument.