Metallographic Microscope

Brief introduction:
Metallographic microscope can be use for metal quality inspection, metallurgical structure analysis of metal pieces after treatment, graphic quality inspection during the silicon lithography processand observation of fine structure of other reflective specimens. It can also be used to observe the surface structure of transparent specimens of certain reflectivity. 6XB-PC metallographic microscope with both transparent and reflective functions can be used as a metallurgical & biological microscope for observation of metal, silicon and other reflective surface structure of specimens.

Technical parameters: 
1, Wide-field eyepieces: 10X 
2, Field diameter: 22mm 
3, Lens: 4X, 10X, 40X, 100X (oil) 
4, Numerical aperture (NA): 0.1,0.25,0.65,1.25 
5, Working distance (mm): 37.5,7.3,0.66,0.37 
6, Total magnification: 40X-1000X 
7, Mechanical tube length: 160 mm 
8, Binocular head: photography trinocular head, 30 ° tilt 
    Eye pupil adjustment range: 55-75mm 
9, Condenser: N.A1.25 Abbe condenser with Iris Diaphragm and filter 
10, Table: 160 × 140mm 
       Mobile area: lateral movement range: 70 mm; vertical movement range: 50mm; venire resolution: 0.1 mm 
Sets of instruments: 
1, Main body: 1 
2, Trinoculor tube: 1 
3,10 X eyepiece: 1 pair 
4, Flat-field lens 4X, 10X, 40X, 100X (oil): 1 for each 
5, Micro slide φ10, φ20: one for each 
6, Filter (blue, green, yellow, frosted): one for each  
7, Hong Tar: 1 bottle 
8, Spare bulb 6V20W: 2 
9, Certificate, warranty card: 1 
10, Manual: 1 
11, Power line: 1 

Optional accessories: 
1,12.5 X eyepiece, 10X micrometer eyepiece, micrometer ( resolution 0.01mm) 
2, Flat-field objective lens 20X, 50X, 60X, 80X 
3, Digital camera, CCD, capture card, adapter lens, 
4, Metallographic analysis software