PCB Cutting Machine

Automatic single sideband component forming machine

Features

★Application: Single-side braided radial element forming and cutting feet. (Both rolls and boxes are available)

★This machine can form 90 degrees, hit front and back K, cut long and short feet, etc.

★Adjustable speed, automatic feeding.

★High precision of forming and cutting feet, easy to adjust.

★Applicable taping hole pitch specifications: 15mm.

★Tool molds are made of special steel, long life

★Motors and electrical appliances are all well-known brands.

★Note: The molding shoulder height is between 1.5-5mm, not less than 1.5mm, the lower the value, it will damage the body.

Specification

Voltage:220V AC60Hz/50Hz

Size：about L450 x W450 x H500mm

Weight:about 24kg

Capability:3300-3600pcs/h

L: 3.5 ±0.2 mm（Center distance, not adjustable）

H : 2.5 ±0.2 mm（No wire diameter, not adjustable）

B : 3.8±0.2 mm

（Does not contain wire diameter, the middle leg is not adjustable, the length of the 1, 3 legs is adjustable）

Push the middle foot forward, with some arcs in the bending angle,Bare feet2.2±0.2mm

H≧1.5mm

B≧2mm（Adjustable）

Electrolytic capacitors with a diameter of 3-7mm and a height not exceeding 16mm, pay attention to the pin length