Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED
Product function:
It is applied to various gas permeation rate detection of O2, CO2, N2 and air, etc. Also in plastic film, composite membrane, High-barrier materials, sheet, metal foil, rubber, etc.
Operating principle:
Using the principle design of differential pressure method, put treated sample in the middle of upper and bottom chamber in advance. Pressure tightly and seal, pick up the suction to the whole system, after reaching the required vacuum degree, close bottom chamber, fill with certain test gas to high pressure chamber, and adjust upper chamber pressure, keep on two sides of the sample forming constant air pressure gradient difference, the gas is under the action of differential pressure gradient, permeating from high-pressure side (upper chamber) to vacuum side (bottom chamber). Accurately measure vacuum chamber (bottom chamber) intensity of pressure variation, calculate various barrier property parameters of test sample. Fully conform to the standard ASTM D1434.
Application characteristic
High speed vacuum ability, reduce the vacuum time, accelerate the degassing, reduce the test error.
Short test time, high efficiency;
Can measure toxic gases, there is no gas leak;
Automatically adjust the test pressure, fit for various pressure requirements;
Save functions when power failure;
A whole-process monitor, automatic recording, can reappear in the whole test process again
Strong graph curve function, convenient for comparison test and analysis;
Automatic testing: Set the test parameters, test automatically proceeds after starting, automatically judge if the test is over and save the test result.
There is general data base system in host software, data could be exported, could store the data, inquire, print, etc. Through the analysis of historical data, it is easy to grasp the history dynamic of the products.
Product feature
Pure semiconductor temperature cold and heat bidirectional control, automatically control temperature warming and cooling. Temperature range is wider and more accurate, parallel work, higher reliability.
Apply base line technology; remove the system error, test result is more accurate.
Be of accurate pressure control ability, maintaining constant pressure difference.
Adopt top grade high precision vacuum transducer, high quality component and part, precise pipeline system and pressure sensor, ensure stability and reliability of instrument running
Embedded system control, fully controlled by computer
Meeting Standards
Compatible with the standard of various tests: ASTM D1434、ISO 2556、ISO 15105-1、JIS K7126-A、YBB 00082003
|
Technical index |
Technical parameter |
|
Model |
APT-61 |
|
Measurement range (cc/m2·day·0.1MPa) |
0.05-50,000 |
|
Test precision |
0.01 cc/m2•day•0.1MPa |
|
Test sample quantity |
6 |
|
Primary sensor quantity |
1 |
|
Test pattern |
Six cavities Integration (mean value) |
|
Vacuum error |
0.1Pa |
|
Vacuum degree |
<10Pa |
|
Vacuum efficiency |
Less than 27Pa in 10 minutes. |
|
Temperature range |
5℃–55℃, semiconductor bidirectional temperature control (water bath type optional) |
|
Temperature control accuracy |
±0.1℃ |
|
Humidity range |
5～95%RH(double-flow humidity method, optional) |
|
Humidity precision |
±2%RH |
|
Test pressure |
0.002MPa～0.2Mpa |
|
Air source pressure |
0.1MPa～0.8 MPa |
|
Test gas |
O2、N2、CO2 or other gas |
|
Carrier gas port |
￠8 |
|
Vacuum tube diameter |
￠15 |
|
Display and control method |
PC machine fully control mode |
|
Correction mode |
Base line correction, Standard film correction, vacuum transducer external correction |
|
Sample thickness |
≤3mm |
|
Test area |
30cm2, circle |
|
Main machine dimension (L*B*H) |
1000×500×380 mm |
|
Weight(KG) |
75Kg |
|
Power supply |
220V AC 50HZ |
Standard configuration
|
No |
Name |
Quantity |
Model |
Unit |
Remark |
|
1 |
Test main machine |
1 |
APT-61 |
Set |
Include Vacuum sensor system, pressure sensor, gas control system, environmental control system, communication system, display & control system, etc. |
|
2 |
High-vacuum pump |
1 |
ND051 |
Set |
Vacuum ability: 0.6Pa |
|
3 |
Professional test software |
1 |
APT series |
Set |
operating system: Windows 2000 or above XP hardware requirement: memory 1G, hard disk above 80G |
|
4 |
Communication cable |
1 |
|
Pc |
Standard RS232 communication line, 2m long |
|
5 |
Vacuum steel tube |
1.5 |
15mm |
meter |
|
|
6 |
Gas hose |
2 |
Diameter 8mm |
meter |
|
|
7 |
Air valve |
1 |
|
Pc |
|
|
8 |
Circle Sample Cutter- sample |
1 |
|
Set |
30cm2 sampler, cut the sample |
|
9 |
Filter paper sampling plate |
1 |
|
Set |
cut filter paper |
|
10 |
Sealing grease |
1 |
|
Pc |
Dow Corning |
|
11 |
USB conversion line |
1 |
|
Pc |
USB1.1 expansion path, 1m long |
|
12 |
computer |
1 |
|
Set |
|
|
Optional |
Gas cylinders for test(oxygen ,etc) |
||||
Send Email
U-therm
U-therm
WhatsApp