Density Tester

Petroleum Product Density Meter (Hydrometer Method)

Model: PT-XH-104B
Input power supply: 220V ± 10% 50HZ
Temperature range: 20℃± 0.5 ℃
Test holes: 2 holes, with 2 pieces of 500ml graduated cylinder
Product description: Petroleum Product Density Meter (Hydrometer Method)
INQUIRY

Introduction:

The instrument uses large capacity aquarium water bath and is equipped with high-precision intelligent digital display and control instruments, with advantage of keeping heat and high precision temperature control, easy to use and reliable. The instrument also uses a compressor cooling when room temperature higher than 20 ℃ and temperature inside the bath can be maintained constant at 20 ℃.

Structure, arranged on one machine for molding machine user-friendly, consists of two parts, bath and electric control part as a whole, the refrigeration system as a whole, at the time of installation, as long as screw off two eight-screws of the front and rear portions of the cooling machine, your hands can lift the refrigeration system, until after putting the cold head slowly into the bathtub, and then put back cooling system into the base unit, and secure the screws. It is ideal instrument for oil, commodity inspection departments, refineries and petrochemical units to measure crude oil and petroleum product density.

Technical Specifications

Description	Parameters
Input power supply	220V ± 10% 50HZ
Temperature range	20℃± 0.5 ℃
Test holes	2 holes, with 2 pieces of 500ml graduated cylinder
Adjusting method	The proportion of time, thermal resistance signal control
Stirring power	6W
Heater power	1400 W
Cooling mode	Compressor cooling, forced air cooling
Throwing cooling machine power	600w
Ambient temperature	Around room temperature 25 ℃
Relative humidity	30~80%