Purpose
The Thermostatic Water Bath is for the medical schools, hospitals and laboratories to examine the pathological serum etc.
Summary of structure
The outer plate of the cabinet is made of cold-rolled steel sheet, paint baked surface; the inner is made of stainless steel, the middle layer adopts polyester as thermal insulation, and it is equipped with constant temperature controller, electric heater.
Main parts
1. The heat constant temperature controller adopts Inconel and brass tube as heat sensor, which is installed under the partition in the cabinet. It is immersed directly in the water for fast heat transmission and high sensitivity.
2. The electrical heating tube is made of U shaped steel tube, sintered magnesia and heating wire. It is immersed directly in the water for preventing heat loss.
Technical parameters
Name |
Electro-Thermostatic Water Bath |
|||
Type |
HH-S 11.2 |
HH-S 21.4 |
HH-S 21.6 |
HH-S 21.8 |
Dimensions of working chamber |
Double-hole |
Double-row four-hole |
Double-row six-hole |
Double-row eight-hole |
Temperature controlling range |
Room temperature+10~99.9 |
|||
Power voltage |
220V 50Hz |
|||
Temperature fluctuation |
±0.5℃ |
|||
Timing range |
1-999min |
|||
Tracking alarm |
±2℃ |
|||
Power consumption |
500W |
1000W |
1500W |
2000W |
Dimensions of inner |
360*200*150 |
360*340*150 |
500*340*150 |
700*340*150 |