Introduction:
I. Main technical features
1. This instrument is a kind of all-in-one machine. The design is reasonable and easy to operate.
2. The rising up and lowering down of the heating furnace is easy and stable to adjust.
3. The water chamber adopts stainless steel material. Good corrosion resistance.
4. The heating power can be adjusted continuously by electronic voltage regulator.
II. Main technical specifications
1. Power supply: AC (220±10%) V, 50Hz
2. Distillation flask: Made of hard glass. Heat resistance is higher than 500℃. Diameter of ball is φ69mm±1mm. Diameter of bottleneck is φ16mm±1mm. The angle between branch pipe and bottleneck is 75°±3°
3. Thermometer: (0~360) ℃, division value 1℃
4. Condensate tank: Made of stainless-steel material. The condenser pipe is made of brass and diameter is ф16mm×1mm.
5. Heat adjustment: It consists of heating device, thermal control circuit and control panel. Power 1000W, Heating rate can be adjusted continuously.
6. Measuring cylinder and weight: Two kinds of cylinder 10ml and 100ml. The weight is made of carbon steel and being placed on cylinder bottom to prevent the cylinder from floating.
7. Working environment: Room temperature-10~+35℃. Relative humidity ≤85%
8. Maximum power consumption: 1100W
9. Dimension: 710mm×240mm×470mm
Ⅲ. Accessories
PT-SYD-255 Petroleum Products Distillation Apparatus Accessories and Documents List
No. |
Name |
Unit |
Qty |
Memo |
1 |
SYD-255 Petroleum Products Distillation Apparatus |
Set |
1 |
|
2 |
Distillation flask (125 ml) |
Piece |
1 |
|
3 |
Thermometer (0~360℃, Scale mark 1.0℃) |
Piece |
1 |
|
4 |
Glass cylinder (100 ml.10 ml) |
Piece |
Each 1 |
|
5 |
Glass container (100×240) |
Piece |
1 |
|
6 |
Iron block |
Piece |
1 |
|
7 |
Silica gel stopper (8#.4#) |
Piece |
Each 2 |
|
8 |
Stopping ring for thermometer (1#) |
Piece |
4 |
|
9 |
Fuse 6A (Ф5×20) |
Piece |
2 |
|
10 |
Sealing strip |
Roll |
1 |
|
11 |
Silicon carbide gasket (-30.-50. with gap) |
Piece |
Each 1 |
|
12 |
Pull rope |
Piece |
1 |
|
13 |
Observation window glass (Installed by user) |
Piece |
1 |
|
14 |
Operation Manual |
Piece |
1 |
|
15 |
Quality Certificate |
Piece |
1 |
|
16 |
Repair Guarantee |
Piece |
1 |
|