Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED
Overview
Automatic cleanser for viscometer is used for cleaning and drying capillary viscometers, such as Ubbelohde, Cannon-Fenske Routine and etc. the experiment’s entire process is auto.
Features
1.Vacuum absorbs, feed liquid interval, it can wash the viscometers repeatedly until the viscometers are clean and the machine works fast.
2.It is suitable for many kinds of viscometers according to the need and supplying different fittings.
3.It can set rinsing time, number of cleaning times, the temperature and time of drying at will.
4.According to the dirty degree of the viscometers, it can select one or two kinds of washing liquids to drive out the residue completely.
5.Pipeline uses oil-proof rubber tube to connect, which is oil-proof and corrosion-resistant.
6.No vapor washing liquid in the washing box and it is safety. The highest temperature is 80°C in the box.
Technical parameters
1.Rated voltage:AC220V±10% 50Hz
2.Total Consumed power:< 700W
3.Vacuum pumping air rate: ≥80L/min
4.Cleaning numbers: Six
5.Bottles of cleaning fluid capacity:2.5L*2
6.Bottles of waste fluid capacity:2.5L
7.Ambient requirement: Temperature: 10~40°C; Humidity≤85%
8. Net dimension: 360*370*515mm,16.5kg
Send Email
U-therm
U-therm
WhatsApp