Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED
Introduction:
Actual colloid in engine fuel is complex substances produced through fuel hydrocarbons oxidative polymerization, condensation, it can also be formed by evaporation in a stream of air under test conditions.
Actual colloid analyzer, is mainly used for the colloid degree determination of fuel (petrol, silicon, kerosene, diesel oil) when engines generated.
The instrument uses the oil bath heating, the silicone oil should be used as heating medium whose flash and fire point is more than 300 ℃, using the latest integrated structural design, the temperature control device selects the most advanced intelligent digital temperature control device, oil bath chose non-corrosive stainless-steel plate and provided with an air filter and air flow meter and other configurations. Facilitate the operation of testing personnel.
Technical Specifications
|
Description |
Parameters |
|
Input voltage |
220V± 10% 50HZ |
|
The oil bath volume |
250 × 150 × 200mm |
|
T-type injector conduit inner diameter |
6mm |
|
No-mouth high beaker volume |
100ml |
|
The flow meter calibration value |
60 l / min |
|
Heating power |
1500W |
|
Temperature accuracy |
Room temperature ~ 300 ℃ ± 1 ℃ |
|
The ambient temperature |
Room temperature about 25 ℃ |
|
Relative humidity |
<85% RH |
Send Email
U-therm
U-therm
WhatsApp