Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED
Description
Nitrogen generator is an advanced gas separation technology. It uses membrane separation air imported from South Korea to produce high-purity nitrogen. The air enters the polymer membrane filter after being compressed and filtered by the compressor. Due to the different solubility and diffusion coefficient of various gases in the membrane, the relative permeation rate of different gases in the membrane is different. Under certain pressure conditions, oxygen and nitrogen are used differently Gases of the same nature have different permeation rates in the membrane to separate oxygen and nitrogen. Compared with other nitrogen making equipment, it has the advantages of simpler structure, smaller volume, no switching valve, less maintenance, faster gas production (≤ 3 minutes), and convenient capacity expansion.
Features
1.High quality molecular sieve (CMS) imported from Korea is used as adsorbent with high purity and long service life
2.Built in professional water separator to ensure long service life of adsorbent
3.Three stage independent filtration system with particles < 0.01um & 0.003mg/m3 to ensure the continuity of gas production
4.Nitrogen purity display, can clearly observe the purity of nitrogen produced by the machine, with high precision
5.Built in compressor, no need for external configuration, and suspended sound insulation system, low noise
6.Double pressure adjustable system, easy to operate
Specification
|
Model |
AYAN-1L |
AYAN-2L |
AYAN-5L |
AYAN-10L |
|
Air output |
1L/min |
2L/min |
5L/min |
10L/min |
|
Purity value |
99% |
|||
|
Pressure value |
0-0.6mpa |
|||
|
Filtration system |
Three-level |
|||
|
Aggregate capacity |
450W |
500W |
1000W |
1600W |
|
Working voltage |
220V 50HZ |
|||
|
Boundary Dimension |
330x500x720mm |
|||
Send Email
U-therm
U-therm
WhatsApp