Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED
Introduction:
The instrument is designed and manufactured based on "Volatile organic liquids for industrial use - Determination of boiling range ". It applies to a boiling point at atmospheric pressure 30 ~ 300 ℃, chemically stable and organic liquid (such as hydrocarbons, esters, alcohols, ketones, ethers and the like organic compounds) during the distillation.
The instrument structure and characteristics are as follows:
This instrument is pre-bend structure. By the heating furnace, digital pressure regulating device, flasks lifting frame, compression chillers, condensers, evaporators, mixers, air-cooled motor, the capillary restrictor, distillation condenser, stainless steel bath, cylinder receptacle station and others. The cold bath uses electric heating, intelligent digital temperature control.
In addition, the instrument especially, retort heating furnace on both sides to increase ventilation holes, help to reduce the ambient temperature of the furnace hall.
Technical parameters
Electric heating section:
1. Mains input: 220V ± 10% 50Hz
2. Electric power: 0.3KW
3. Heating mode: 0 ~ 220V electronic regulator
Cold bath section:
1. Mains input: 220V ± 10% 50Hz
2 . Compressor power: 280W
3.Heating tube power: 800W
4. Stirring motor: 15W
5. Temperature range: 0 ~ 60 ℃
6. Temperature control accuracy: 0.5 ℃ Display Accuracy: 0.1 ℃, digital temperature control instrumentation instructions
7. Cooling time: room temperature ~ 0 ℃ not more than 60 minutes
8. Bath volume: 10 liters
9. Ambient temperature: About 25 ℃
10. Relative humidity: <85% RH
Send Email
U-therm
U-therm
WhatsApp