Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED

   Home   |   Product   |   Manually-operated Door Pulsating Vacuum Pressure Steam Sterilizer Series

Horizontal Cylindrical Pressure Steam Sterilizer

  • Manually-operated Door Pulsating Vacuum Pressure Steam Sterilizer Series
Manually-operated Door Pulsating Vacuum Pressure Steam Sterilizer Series

Manually-operated Door Pulsating Vacuum Pressure Steam Sterilizer Series

  • Model: MZMQ21-0.2/0.24/0.36/0.5/0.6/0.8SZ
  • Design pressure (MPa): 0.25
  • Design temperature (℃): 139
  • Working pressure (MPa): 0.22
  • Product description: Manually-operated Door Pulsating Vacuum Pressure Steam Sterilizer Series
  • INQUIRY

Introduction:

MZMQ21 series pulsing vacuum autoclave has built-in PLC + touch screen controller. Its pulsing vacuum system can remove the cold air from the chamber, thus to eliminate the cold air’s influence on sterilization. After sterilizing process, there is vacuum drying system and jacket drying system to bake the facility; thus to make the facilities dried completely. There is graph operation system, with built-in software for B-D testing, surgical sterilization, textile sterilization, liquid sterilization procedures; such procedures could be done automatically or manually. Thus this autoclave is widely used in hospital supplying department, surgical department, pharmaceutical factory, research institution and etc.

 

Characteristics:

1. Main body adopts rectangular double-layer structure. Inner layer is high quality 06Cr19Ni10 stainless steel and outer layer is pressure vessel steel plate Q235-B. Both layers are welded by adopting automatic welding technology. Inner layer is treated with special mechanical process and chemical surface technology.

2. The control system uses PLC + touch screen microcomputer automatic control, using a graphical man-machine interface terminal, timely sterilization process status display, simple and intuitive. The system is stable, precise temperature control, improved sterilization records and print functions.

3. Piping system made of stainless steel piping, pumps and domestic brands of imported valves, ensure that the equipment is reliable.

4. There are single and double gates of choice, the use of radial seal door latch locking structure, configuration, safety interlocks, easy to operate. Seals with high temperature, elastic silicone rubber durable.

5. Comes the steam generator with automatic water, low water level control and automatic power-off protection.

6. An outer casing made of stainless steel or steel plate spray, nice, dustproof and waterproof insulation, enabling to improve the working environment.

7. With the verification device, in line with GMP requirements.

8. The product according to the latest national standard GB8599-2008 and reference to the US FDA and the European standards EN285, EC / 97/23 standard sterilization equipment production requirements.

9. Stand-alone device with optional bar code scanning equipment and a network interface, can be easily linked into the traceability system, the package of instruments, such as a single instrument traceable quality management. With a computer monitor interface enables remote network monitoring.

10. High quality vacuum pump to make sure the best effect on sterilization.

 

Technical Parameters:

1. Design pressure (MPa): 0.25

2.Design temperature (℃): 139

3. Working pressure (MPa): 0.22

4. Operating temperature (℃): 134

5. Water pressure (MPa): 0.15-0.3 (deionized water)

6. Air pressure (MPa): 0.3-0.6

 

Volume

(m3)

Inner chamber dimension (L*W*H) mm

Water consumption

(kg)

Stroke cycle

(min)

Weight

(KG)

Control power

(kw)

Electric source

Electric steam power

≤(kw)

0.2

750×500×550

85

70

900

2

Three-phase four-wire system AC.380/220±10%(V)50±1(HZ)

30

0.24

850×500×550

85

70

950

2

30

0.36

1000×580×620

95

70

1050

2

36

0.5

1000×680×720

110

70

1200

3

36

0.6

1200×680×720

110

70

1250

3

36

0.8

1500×680×720

120

70

1350

3

45

PRODUCT CATEGORIES

LATEST NEWS