Welcome: U-THERM INTERNATIONAL (H.K.) LIMITED

   Home   |   Product   |   Gas (oxygen) Permeation Rate Tester

Gas Permeation Rate Tester

  • Gas (oxygen) Permeation Rate Tester
Gas (oxygen) Permeation Rate Tester

Gas (oxygen) Permeation Rate Tester

  • Model: DPG-V1
  • Pure semiconductor temperature controlled
  • Automatically control temperature warming and cooling
  • Temperature range is more wide and more accurate
  • Product description: Gas (oxygen) Permeation Rate Tester
  • INQUIRY

Product function:

It is applied to various gas permeation rate detection, such as O2,CO2,N2 and air, etc, in plastic film, composite membrane, High-barrier materials, sheet, metal foil, rubber, etc.


Operating principle:

Using the principle design of differential pressure method, put treated sample in the middle of upper and bottom chamber in advance. Pressure tightly and seal, pick up the suction to the whole system, after reaching the required vacuum degree, close bottom chamber, fill with certain test gas to high pressure chamber, and adjust upper chamber pressure, keep on two sides of the sample forming constant air pressure gradient difference, the gas is under the action of differential pressure gradient, permeating from high-pressure side (upper chamber) to vacuum side (bottom chamber). Accurately measure vacuum chamber( bottom chamber) intensity of pressure variation, calculate various barrier property parameters of test sample. Fully conform to the standard GB1038,ASTM D1434.


Application characteristic

High speed vacuum ability; reduce the vacuum time, degassing more thoroughly, high test precision.

Short test time, high efficiency;

Could extend to test bottle, bag;

Save when power failure functions;

Little gas consumption, one bottle of gas could be used for one month continuously.

A whole-process monitor, automatic recording, sampling rate could be adjusted, automatically repeat the test.

Strong graph curve function, convenient for comparison test and analysis;

Automatic testing: Set the test parameters, test automatically proceeds after starting, automatically judge the test is over and save the test result.

There is general data base system in host software, data could be exported, could store the data, inquire, print, etc.

Through the analysis of historical data, it is easy to grasp the history dynamic of the products.


Product feature

Pure semiconductor temperature controlled, automatically control temperature warming and cooling. Temperature range is more wide and more accurate, parallel work, higher reliability.

Apply base line technology; remove the system error, test result is more accurate.

Be of accurate pressure control ability, maintaining constant pressure difference.

Adopt top grade high precision vacuum transducer, high quality component and part, precise pipeline system and pressure sensor, ensure stability and reliability of instrument running

Embedded system control, large liquid crystal display, host and PC machine double control and double operation


Meeting Standards

Compatible with the standard of various tests ISO, etc: ASTM D1434ISO 2556ISO 15105-1JIS K7126-AYBB 00082003

Technical index

Technical parameter

Model

DPG-V1

Measurement range( film)

(cc/m2·day·0.1MPa)

0.05-100,000

Test precision

0.01 cc/m2•day•0.1MPa

Test sample quantity

1

Primary sensor quantity

1

Test pattern

Independent single cavity

Vacuum error

0.1Pa

Vacuum degree

<10Pa

Vacuum efficiency

Less than 27Pa in 10 minutes, less than 20Pa in 15 minutes.

Testing efficiency

Test time < 4 hours, when Transmittance >5cc/m2.day.0.1MPa

Temperature range

5℃–55(90is optional.)

Temperature control accuracy

±0.1

Humidity range

590 %RH(double-flow humidity method)

Humidity precision

±1%RH

Test pressure

0.1MPa0.2Mpa

Air source pressure

0.1MPa0.8 MPa

Test gas

O2,N2,CO2 or other gas

Carrier gas port

8

Vacuum tube diameter

15

Display and control method

Test host large size liquid crystal screen real- time display ,computer and test host double control mode

Correction mode

Base line correction, Standard film correction, vacuum transducer external correction

Sample thickness

3mm

Test area

50cm2,circle( other dimension could be customized.)

Main machine dimension

(L*B*H)

585×640×430mm

Weight(KG)

40Kg

Power supply

220V AC 50HZ



PRODUCT CATEGORIES

LATEST NEWS